SMOK Morph 3 Setup Guide

Introduction

The SMOK Morph 3 with T-Air Tank offers a powerful and customizable vaping experience. This step-by-step guide will help you assemble, fill, and use your device correctly, and troubleshoot common issues.

What You Need

• SMOK Morph 3 with T-Air Tank Starter Kit
• SMOK TA Series 0.2ohm Replacement Coil (50-70W)
• Your preferred vape juice

Step 1: Initial Assembly

1. Unbox your Morph 3 and T-Air Tank.
2. Install two high-drain 18650 batteries (sold separately) into the device, ensuring correct polarity.
3. Attach the T-Air Tank to the top of the Morph 3 device by screwing it clockwise.

Step 2: Coil Priming

1. Unscrew the T-Air Tank base to access the coil slot.
2. Insert a new SMOK TA Series 0.2ohm coil into the base.
3. Drip 5-8 drops of e-liquid directly onto the cotton openings of the coil to prime it.
4. Reattach the tank base securely.

Step 3: Filling the Tank

1. Locate the top-fill cap on the T-Air Tank.
2. Slide or unscrew the cap to reveal the fill port (refer to the kit manual if unsure).
3. Fill the tank with your preferred e-liquid, being careful not to overfill.
4. Close the fill cap tightly.

Step 4: First Use

1. Let the tank sit for 5-10 minutes so the coil is fully saturated.
2. Press the power button 5 times quickly to turn on the Morph 3.
3. Adjust airflow to your preference using the tank’s airflow ring.

Step 5: Setting Wattage

1. Use the up and down buttons to set the wattage between 50-70W for the 0.2ohm coil.
2. Start at the lower end (50W), test, then increase if desired for more vapor.

Common Troubleshooting Tips

• No Vapor: Check that the batteries are charged and installed properly. Ensure the coil is installed and primed.
• Leaking: Make sure all tank parts are tightened, and do not overfill. Ensure the coil is seated correctly.
• Dry Hits/Burnt Taste: Confirm the coil is primed and the tank has enough e-liquid. Wait after filling before vaping.
• Check Atomizer Error: Remove and reinstall the tank and coil. Replace the coil if error persists.

Conclusion

Following these steps will ensure a smooth and enjoyable experience with your SMOK Morph 3 and T-Air Tank. For more tips and device guides, explore our blog at We Smoke Vape.